Congratulations on the acquisition of EG-C47 Aircraft
This aircraft has an advanced simulation script. Realism is what I tried to achieve.
Do not expect to master this plane immediately and without difficulty.
Gently landing on your wheels at the beginning of the track will be a challenge for you.
The weight and inertia of the C47 air gives it a very realistic feel.
You can board your passengers and to discover the airlines like in 40 years.
To position the plane on the ground as you wish
1/ wait until all the parts are correctly rezzed
2/ Sit down in pilot position and accept all the attachments
3/ Show the invisible parts (Ctrl + alt + t)
4/ right click on the far end of the nose of the plane and edit
5/ position the plane as you wish and then leave edit mode and invisible parts mode
6/ You can then either fly or leave the plane
IF YOU TRY TO MOVE THE PLANE WITHOUT SITTING IN IT, THE DIFFERENT PARTS WILL NOT FOLLOW.
1 / Features
Pilot + co-pilot + 8 passengers (10 people)
Realistic Engine start and stop
Landing gear and retractable doors
Functional retractable flaps
Sliding door
Functional interior doors
Functional window curtains
Realistic ceiling lighting
Crash simulation with flames and smoke if landing with gear up
2 / Hud command
From left to right:
a / Opening and closing the exterior door
b / Ignition position lights (strobe)
c/ Start and stop the left engine
d / Start and stop the right engine
e / Control gear (green = wheels retracted)
f / parking brake (setting poses during the flight)
g/ Order of the flaps (green = left)
h/Command parachute jump, 1-click "preparation" the red light is on, click the 2nd green and para jump one by one to one second intervals automatically (ejection of paras)
i /Ordering dropping dummies
j/ Order of the light passenger cabin
3 / flight characteristics
You will be surprised by the flight of the airplane. You must think as if the plane was real.
If you mount with insufficient power, it will lose speed and eventually you will go down.
If your speed is too high to land, you can not land the plane.
a / Lift off
Align the aircraft on the runway and make sure nothing is in front.
Lock brakes (brakes on the green on hud)
Roll up flaps (flaps red illuminated on the hud)
Push the gas 100%
Unlock the brakes (brakes on red on the hud)
The aircraft took off alone
b / cruise
Enter the landing gear (2 red lit on the hud)
Climb up to the desired altitude
Reduce power to 60%
Keep your cruise
Attention to variation in altitude, climb = loss of speed, descending = acceleration.
c/ Paratrooper avatars
Fly a 70% power
Before flying over the drop zone prepare paras, (red on, paragraphs are standing in the aircraft)
On the drop zone send the GO (green LED lit), the paratroopers will be ejected from the aircraft for their jumps.
d /Paratrooper dummies
Fly a 70% power
Expect to fly over the drop zone and off the model, (green LED lit)
Note: You must have permission to build on the drop zone. Otherwise, the models will not be dropped.
c / Landing
The landing must be prepared, I recommend not to approach directly
Make a first pass aparallel to the runway at an altitude of 60 - 80 m
Make a rectangular circuit to introduce the aircraft in front of the runway at a distance of 250m (a sim)
Reduce power to 40%
Expect to see the green on the track glides.
Put the landing gear down (2 green lit on the hud)
Get the Flaps to slow the plane (green lights on the hud)
Reduce power gradually while maintaining the alignment and glides in the green
Watch the speed, too fast you miss the track ... too slow you crash into the track
